Mopedland > Spares > Rex & Hercules spares

Hercules | Rex/Phillips

Piston sets - single-speed.

40.5mm. std - 1 × Kolbenschmidt (£20 ea)

40.5mm. std - 1 × Asso (£20 ea)

40.75mm. 1st O/S - 1 × Bretille (£20 ea)

41mm. 2nd O/S - 1 × Bretille (£20 ea)

Bare Pistons - single-speed.

40.5mm. std (£8 ea)

Piston sets - 2-speed/3-speed.

40.00mm. Std - 3 × Kolbenschmidt (£20 ea)

40.25mm. 1st O/S - 1 × Vertex (£20 ea)

40.25mm. 1st O/S - 4 × Kolbenschmidt (£20 ea)

40.5mm. 2nd O/S - 1 × Vertex (£20 ea)

40.5mm. 2nd O/S - 2 × Kolbenschmidt (£20 ea)

40.75mm. 3rd O/S - 1 × Kolbenschmidt (£20 ea)

41mm. 4th O/S - 5 × Kolbenschmidt (£20 ea)

41.25mm. 5th O/S - 1 × Kolbenschmidt (£20 ea)

41.25mm. 5th O/S - 5 × Vertex (£20 ea)

41.5mm. max O/S - 2 × Vertex (£20 ea)

41.5mm. max O/S - 3 × Kolbenschmidt (£20 ea)

Cylinders - 2-speed/3-speed

40.5mm - 2nd oversize, freshly bored c/w with piston set (£50) EXCHANGE.

Cylinders - single-speed

40.5mm - Std, used. Sand blasted (£15).

Piston Rings - single-speed

40.5mm × 2.5mm hemi-peg (C) std - 6 pairs × Hepolite ref 7160 (£8 pr)

40.5mm × 2.5mm hemi-peg (C) std - 6 singles × Goetze (£8 pr)

Piston Rings - 2-speed/3-speed

40mm × 2.5mm hemi-peg (C) std - 3 pairs × Hepolite ref 9690 (£8 pr)

40mm × 2.5mm hemi-peg (C) std - 6 singles × Goetze (£8 pr)

40mm × 2.5mm hemi-peg (C) std - 7 singles × Remax/Romax (£7 pr)

40.25mm × 2.5mm hemi-peg (C) (1st oversize) - Goetze (£8 pr)

Engine Parts

V42 Helical gear with clutch shaft (used) - (£4 ea)

Decompressor Parts - single-speed/2-speed/3-speed

V52 decompressor valve single-speed (2" long) - (£2 ea)

2139/V3155 decompressor valve 2-speed/3-speed re-machined - (£5 ea)

V3635 Decompressor lever (handlebar) (2-speed/3-speed) - (£4 ea)

V55/2142/V3157 Decompressor valve spring - (£1 ea)

V54/V2141/V3141 Decompressor lever (engine) + screw, Recon - £8.

V54/V2141/V3141. Decompressor lever (engine), bare mech, Recon - £4.

Decompressor Cable Cup re-machined - (£1.50p ea).

Front Sprockets - 2-speed

12T - (£8 ea)

13T - (£8 ea)

Front Sprockets - 3-speed

12T - (£8 ea)

13T - (£8 ea)

14T - (£8 ea)

Gasket Sets (full engine)

2-speed - (£5 ea)

3-speed - (£5 ea)

Gasket Sets (part engine)

2-speed complete engine excluding exhaust manifold gasket - (£3.50ea)

Gaskets (individuals) - 2-speed/3-speed

Cylinder head - (£1.50p ea)

Cylinder base - (50p ea)

Gasket Sets (full engine)

Single-speed (Panda Mk1/Mk2) - (£5 ea)

Gasket Sets (individuals) - single-speed

Single-speed cylinder head - (£1.50p ea)

Inlet manifold - (£1.50p ea)

Cylinder base (rubber O-ring) - (50p ea)

Main crankcase gasket - (25p ea)

Secondary crankcase gasket - (25p ea)

V66 Exhaust gasket - £1.

Exhaust - Panda/single-speed

V409 Exhaust Bracket - £3.

Clutch Plates - 2-speed/3-speed

Single, 73mm flat tags - Surflex (£4 ea)

Boxed pair, 73mm formed tags - Adige (£8 pr)

Single, 73mm formed tags - Adige (£4 ea)

Boxed pair, 75mm flat tags - Adige (£8 pr) *Rex 49 Model 504 2-speed

Single, 75mm formed tags - Adige (£4 ea)

Single, 75mm flat tags - Green (£4 ea) 4sp

Clutch Kits - single-speed (Panda Mk1/Mk2)

9 × packed kits (2 × steel, 4 × thin SRBF, 1 × thick SRBF plates) - 7plate set (£24 ea)

Clutch Parts - single-speed (Panda Mk1/Mk2)

V146 Clutch case & 12T sprocket - (£15 ea)

V146 Clutch case & 12T sprocket good/used - (£10 ea)

V146 Clutch case & 12T sprocket used - (£5 ea)

V147 Clutch cap New - (£5 ea)

V147 Clutch cap Used - (£2.50 ea)

V148 Driving sleeve (clutch centre) New - (£5 ea)

V148 Driving sleeve (clutch centre) good/used - (£3 ea)

V148 Driving sleeve (clutch centre) poor/used - (£1 ea)

V149 Clutch securing nut - (£2 ea)

Locking Screw (for clutch securing nut) - (£1 ea)

V150 Driven clutch plate (steel) - (£3 ea)

V150 Driven clutch plate good/used (steel) - (£2 ea)

V150 Driven clutch plate poor/used (steel) - (£1 ea)

V151 Fibre clutch ring - (£2 ea)

V152 Clutch drive plate - New original compounded cork and Surflex bonded fibre (£5 ea)

V153 Clutch Pressure Plate Used - (£2.50 ea)

V154 Clutch spring (6) set - (£5 set)

V155 Clutch spring pressure cup (6) set new - (£5 set)

V155 Clutch spring pressure cup (6) used - (£3 set)

V156 Clutch carrier plate New - (£2 ea)

V156 Clutch carrier plate Used - (£1 ea)

V157 Spring Ring - (£2 ea)

V158 Clutch centre stud - (£2 ea)

V159 Roller bearing (clutch centre) - (£5 ea)

2 × V160 Distance Washer (clutch centre) - (£1 ea)

V162 Clutch small circlip - (50p ea)

V164 Tension Spring (for clutch dome) - (£2 ea)

V166 Clutch operating arm New - (£5 ea)

V166 Clutch operating arm Used - (£3 ea)

V167 Clutch Bracket Used - (£5 ea)

V168 Clutch retaining pin - (£3 ea) (remade, stainless steel).

V168 Clutch retaining pin Used - (£2 ea)

Engine seals - 2-speed (to order)

Pedal shaft (2 per) - R16 × 22 × 4A1N (£3 ea)

Main seal (1 per) - R17 × 35 × 7A1N (£3.50p ea)

Main seal (1per) - R15 × 24 × 7A1N (£3 ea)

Selector shaft (1 per) - R10 × 16 × 4A1N (£3 ea)

Output shaft (1 per) - R12 × 22 × 7A1N (£3 ea)

Engine Seals - single-speed (Panda Mk1/Mk2) (to order)

Main seal (1 per) - R15 × 24 × 7A1N (£3 ea)

Output shaft seal (1 per) - R15 × 24 × 7A1N (£3 ea)

MPM Big End Kits - 2-speed/3-speed

1 × kit - crank pin/roller bearings/conrod c/w small end bearing (£40)

Bearings - single-speed (Panda Mk1/Mk2) (to order)

Centre main bearing 20 × 42 × 6 - 16004.

Drive side main bearing 15 × 32 × 8 - 16002.

Mag side main bearing 15 × 32 × 8 - 16002.

Output shaft mag side bearing 15 × 32 × 8 - 16002.

Drive side output shaft bearing 15 × 32 × 9 - 6002.

Bearings - 2-speed/3-speed (to order)

Main bearings (2 per) - 6202 (£5 ea)

Gearbox output shaft bearing (1 per) - 6201 (£5 ea)

Back pedal brake ratchet lever - (Gadabout P39/P50)

Phillips Rex 2-speed/3-speed - (£8)

Engine Mounting Sets

Motorised Cycle Rear Engine Mounting Set (6 parts) Used - £6.

Panda Mk2 Front Engine Mounting Set (4 parts) Used - £4.

Panda Mk1/2 Rear Engine mounting Set V228/V229 (2 parts) Used - £2.

Cables - single-speed (Panda Mk1/Mk2)

Phillips Rex decompressor cable (long) - (£5 ea)

Phillips Rex clutch cable - (£5 ea)

Phillips Rex throttle cable V.621 - (£5 ea)

Phillips Panda/Hercules Corvette front brake cable 32" (Amal lever/B.H.Co. brake) - (£5 ea)

Cables - 2-speed/3-speed (Gadabout P39/P50)

Phillips Rex decompressor cable (short) - (£5 ea)

Phillips P39 Rex Magura 2-speed gear cable - (£5 ea)

Phillips Magura Pallas/Bing throttle cable - (£5 ea)

Magura Rex clutch cable - (£5 ea)

Phillips Gadabout P39/P45/P50 front brake cable 32" (Amal lever/B.H.Co. brake) - (£5 ea)

Controls

P39/2-speed Hand Change (Magura) with black grip - (£6 ea)

V616 Panda/single-speed Clutch lever (Amal) - (£5 ea)

V3535 P39/P50 Decompressor lever - (£4 ea)

V3640 P50 Enrichment Lever Unit (Choke lever) - (£5 ea)

Fork Bushes - 2-speed/3-speed (Gadabout P39/P45/P50)

V3364 Top front fork bushes (Cast, hexagonal broached) - (£10 ea)

V3374 Mudguard retainer pin, nut & washer - (£2 ea)

Bearing Cups - 2-speed/3-speed (Gadabout P39/P50)

Bearing cups suited to B.H.Co. full width hub - (£5 ea)

Cycle Fittings - (Phillips Gadabout P39/P45/P50)

Toolbox cover screw, standard 2BA thread, stainless steel, machined new, £7.50 each.

Carburettor - 12mm Bing 1/12/27 (Panda Mk1/Mk2)

Main jet 60, Needle jet 2.12, Needle 2 (position 4, highest), Air slide 8B (New - £30)

Main jet 62, Needle jet 2.12, Needle 2 (position 4, highest), Air slide 8B (Used - £20)

Carburettor Parts (Bing) - single-speed (Panda Mk1/Mk2)

Mesh Air Filter, 50mm, for 12/14mm Bing carb.  New - £9 each

V69 Carburettor union (inlet manifold) - (£4 ea)

V73 Float chamber lip gasket - (£1 ea)

V78 Cover (carb top) - (£1 ea)

V80 Throttle needle (2) - (£2 ea)

V85 Petrol feed nipple - (£2 ea)

V87 Throttle spring - (£3 ea)

V88 Choke shutter - (£1 ea)

V90 Filter spring clip - (£4 ea)

V93 Float hinge plate - (£3 ea)

V96 Float chamber - (£3 ea)

V99 Carburettor insulating bush - (£3 ea)

Air intake rubber P39/2sp (Pallas carb) - (£10)

2187. Carburettor Union (inlet manifold) - (£4 ea)

Note -

The specified spark plug for the Phillips Panda was a KLG F20.  This converts to Champion B4H.

Hercules | Rex/Phillips

Bearings & Seals

19806 Oil Seal - Crankshaft 30×15×10.  £5 each

17572 Ball Bearing - Crankshaft 35×15×11 6202.  £7 each

Corvette/Lavalette Main Bearing 42×15×13 6302.  £8

Corvette/Lavalette Crank Seal 24×15×7.  £5

Piston Rings

20791 Piston Rings 42×2mm B-slot Hepolite.  £25 pair

20791 Piston Rings 42×2mm A-slot (grind to B).  £20 pair

Corvette/Lavalette Piston Rings 40×2.5mm C-slot.  £8 pair

Gaskets

G-5-15. Gearbox Bevel Case Joint Gasket.  £1

G-5-14. Gearbox Joint Gasket.  £1

G-5-13. Gearbox Inspection Plate Cover Gasket.  £1

24/20792 Cylinder Base Gasket.  £1

MCS756 Complete engine & gearbox gasket set, Payen (cyl head gasket NOT included).  £5

Clutch & Gearbox

31-5-2. Gearbox Mainshaft Circlip.  50p

12-8-46. Gearbox Crownwheel Locking Washer.  £2

12-5-10. Drive Sprocket Lock Washer.  £2

31-8-4 Circlip, Clutch Centre.  £2

31-8-5 Circlip, Clutch Assembly.  £2

36-11-6. Clutch Spring.  £3

G-37-12 Clutch Centre (c/w 2xfitted bush 19-5-3).  £25

G-39-6 Plain Plate, thick.  £10

G-39-7 Plain Plate, thin.  £10

G-40-17. Clutch Plate (Bonded).  £15

G-40-16. Clutch Plate (Fabric) Ferodo VM41.  £20.

G-42-4 Clutch Spring Cup.  £3

37-1-1 Clutch Rod.  £1

Gudgeon Pin

27/20789. Gudgeon Pin (lightly pitted).  £2

28/20790. Gudgeon Pin Circlips.  50p

Carburetter parts

308/019/21. Carburetter Float & Needle Combined (bruised) £4

308-038 Throttle Spring.  £3

308/044 Jet Needle Clip.  £3

360/022 Carburetter Float Chamber Gasket.  £1

Tank Rubbers

ME-80. (4 set).  £5 set

Ignition

Miller capacitor for ignition system (new).  £8

Lavalette VM/BB Mag Flywheel Extractor.  £12.

Brakes

Front Brake Lining Kit with rivets, Nu-Texa.  £8

Exhausts

Her-Cu-Motor Exhaust Pipe (stainless steel).  £40

Manuals

Her-Cu-Motor 'General Running, Maintenance and Spare Parts Manual', Tatty condition, but complete and original.  £10

Transfers

Hercules | Rex/Phillips

Mopedland > Spares > Rex & Hercules spares